Differences

This shows you the differences between two versions of the page.

--- informatica:hp_xw4400_400sb_upgrade_2017 [2017/05/19 16:06]
miquel [Disc dur amb problemes]
+++ informatica:hp_xw4400_400sb_upgrade_2017 [2017/05/31 14:58]
miquel [Impressora en PDF]
@@ Line 149: / Line 149: @@
 Elimino els següents metapackages per poder eliminar altres paquets o programes que depenen d'ells sense haver de desinstal·lar altres paquets que sí que m'interessen,
-  * :fail: gnome
+  * :ok: gnome
+  * :fail: task-gnome-desktop
   * :fail: gnome-desktop-environment
   * :fail: gnome-office
+  * :fail: gnome-documents
 Llavors desinstal·lo:
-  * :fail: gnome-games, gnome-games-data, gnome-games-extra-data
+  * :ok: gnome-games, gnome-games-data, gnome-games-extra-data
-  * :fail: simple-scan, xsane, xsane-common, i les biblioteques relacionades
+  * :ok: simple-scan
   * ...
@@ Line 387: / Line 389: @@
 ==== Avahi ====
-FIXME S'ha de configurar (fitxer ''/etc/avahi/avahi-daemon.conf'') per tal de restringir la difusió dels serveis disponibles a l'ordinador i, potser, la cerca de serveis a la xarxa.
+Aturo i desactivo el servei amb les comandes
+  * ''systemctl stop avahi-daemon'' i ''systemctl disable avahi-daemon''; i
+  * ''systemctl stop avahi-daemon.socket'' i ''systemctl disable avahi-daemon.socket''
 ==== Trivial FTP daemon ====
-Enllaços sobre la configuració del //tftpd//
+FIXME Enllaços sobre la configuració del //tftpd//
   * http://chschneider.eu/linux/server/tftpd-hpa.shtml
@@ Line 399: / Line 403: @@
 ==== Bootparam ====
-Cal configurar-lo per servir el sistema operatiu de la consola.
+FIXME Cal configurar-lo per servir el sistema operatiu de la consola.
 ==== NFS ====
-Cal configurar-lo per servir el sistema operatiu de la consola.
+FIXME Cal configurar-lo per servir el sistema operatiu de la consola.
 ==== NTP ====
@@ Line 509: / Line 513: @@
     * [[https://wiki.archlinux.org/index.php/GNOME_Tips | GNOME Tips]]
     * [[https://wiki.archlinux.org/index.php/GNOME_2.28_Changes#Configuring_gdm_2.28 | Configuring GDM 2.28]]
+=== Gnome Shell Extensions ===
+Segueixo les instruccions a [[https://unix.stackexchange.com/questions/353962/debian-jessie-unable-to-install-gnome-extension-the-native-host-connector-is-no | stackexchange.com]] per poder instal·lar les següents extensions pel Gnome:
+  * [[https://extensions.gnome.org/extension/118/no-topleft-hot-corner/ | No Topleft Hot Corner]]
+  * ...
 ===== Instal·lació del TopSpin =====
@@ Line 604: / Line 615: @@
 <file>
 [167527.620207] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
 [167527.620210] sd 11:0:0:0: [sdb]
 [167527.620213] Sense Key : Medium Error [current]
@@ Line 613: / Line 623: @@
 [167527.620235] end_request: critical medium error, dev sdb, sector 2048
 [167527.620240] Buffer I/O error on device sdb, logical block 256
 [167535.691059] sd 11:0:0:0: [sdb] Unhandled sense code
 [167535.691066] sd 11:0:0:0: [sdb]
@@ Line 625: / Line 634: @@
 [167535.691098] end_request: critical medium error, dev sdb, sector 2048
 [167535.691103] Buffer I/O error on device sdb, logical block 256
 [167576.211102] sd 11:0:0:0: [sdb] Unhandled sense code
 [167576.211109] sd 11:0:0:0: [sdb]
@@ Line 637: / Line 645: @@
 [167576.211140] end_request: critical medium error, dev sdb, sector 111329280
 [167576.211146] Buffer I/O error on device sdb8, logical block 0
+</file>
-[167591.821201] sd 11:0:0:0: [sdb] Unhandled sense code
+o
-[167591.821206] sd 11:0:0:0: [sdb]
-[167591.821208] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
-[167591.821210] sd 11:0:0:0: [sdb]
-[167591.821212] Sense Key : Medium Error [current]
-[167591.821215] sd 11:0:0:0: [sdb]
-[167591.821217] Add. Sense: Unrecovered read error
-[167591.821219] sd 11:0:0:0: [sdb] CDB:
-[167591.821220] Read(10): 28 00 00 00 08 00 00 00 08 00
-[167591.821227] end_request: critical medium error, dev sdb, sector 2048
-[167591.821232] Buffer I/O error on device sdb1, logical block 0
-[167609.355662] sd 11:0:0:0: [sdb] Unhandled sense code
+<file>
-[167609.355667] sd 11:0:0:0: [sdb]
+[168724.524020] usb 5-7: new high-speed USB device number 14 using ehci-pci
-[167609.355670] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
+[168724.664870] usb 5-7: New USB device found, idVendor=152d, idProduct=2329
-[167609.355672] sd 11:0:0:0: [sdb]
+[168724.664876] usb 5-7: New USB device strings: Mfr=1, Product=2, SerialNumber=5
-[167609.355674] Sense Key : Medium Error [current]
+[168724.664879] usb 5-7: Product: USB to ATA/ATAPI Bridge
-[167609.355677] sd 11:0:0:0: [sdb]
+[168724.664883] usb 5-7: Manufacturer: JMicron
-[167609.355679] Add. Sense: Unrecovered read error
+[168724.664886] usb 5-7: SerialNumber: 801130168383
-[167609.355682] sd 11:0:0:0: [sdb] CDB:
+[168724.665536] usb-storage 5-7:1.0: USB Mass Storage device detected
-[167609.355683] Read(10): 28 00 06 a2 c0 00 00 00 08 00
+[168724.665701] usb-storage 5-7:1.0: Quirks match for vid 152d pid 2329: 8020
-[167609.355691] end_request: critical medium error, dev sdb, sector 111329280
+[168724.665736] scsi13 : usb-storage 5-7:1.0
-[167609.355696] Buffer I/O error on device sdb8, logical block 0
+[168729.117271] scsi 13:0:0:0: Direct-Access                                    PQ: 0 ANSI: 2 CCS
+[168729.117663] sd 13:0:0:0: Attached scsi generic sg2 type 0
+[168759.413200] sd 13:0:0:0: [sdb] READ CAPACITY failed
+[168759.413206] sd 13:0:0:0: [sdb]
+[168759.413209] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
+[168759.413212] sd 13:0:0:0: [sdb]
+[168759.413215] Sense Key : Unit Attention [current]
+[168759.413220] sd 13:0:0:0: [sdb]
+[168759.413224] Add. Sense: Not ready to ready change, medium may have changed
+[168764.942936] sd 13:0:0:0: [sdb] Test WP failed, assume Write Enabled
+[168773.198053] sd 13:0:0:0: [sdb] Asking for cache data failed
+[168773.198060] sd 13:0:0:0: [sdb] Assuming drive cache: write through
+[168830.604440] sd 13:0:0:0: [sdb] READ CAPACITY failed
+[168830.604445] sd 13:0:0:0: [sdb]
+[168830.604447] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
+[168830.604449] sd 13:0:0:0: [sdb]
+[168830.604451] Sense Key : Unit Attention [current]
+[168830.604454] sd 13:0:0:0: [sdb]
+[168830.604457] Add. Sense: Not ready to ready change, medium may have changed
+</file>
-[167621.491508] sd 11:0:0:0: [sdb] Unhandled sense code
+i el resultat d'executar la comanda ''smartclt -a /dev/sdb'' és,
-[167621.491514] sd 11:0:0:0: [sdb]
-[167621.491517] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
-[167621.491520] sd 11:0:0:0: [sdb]
-[167621.491523] Sense Key : Medium Error [current]
-[167621.491527] sd 11:0:0:0: [sdb]
-[167621.491530] Add. Sense: Unrecovered read error
-[167621.491533] sd 11:0:0:0: [sdb] CDB:
-[167621.491535] Read(10): 28 00 00 00 08 00 00 00 08 00
-[167621.491546] end_request: critical medium error, dev sdb, sector 2048
-[167621.491551] Buffer I/O error on device sdb, logical block 256
-[167631.157487] sd 11:0:0:0: [sdb] Unhandled sense code
+<file>
-[167631.157493] sd 11:0:0:0: [sdb]
+root@cie-55-31:/home/sermnadmin/Documents/old-old-hdd-recovery# smartctl -a /dev/sdb
-[167631.157496] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
+smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
-[167631.157499] sd 11:0:0:0: [sdb]
+Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
-[167631.157502] Sense Key : Medium Error [current]
-[167631.157506] sd 11:0:0:0: [sdb]
+=== START OF INFORMATION SECTION ===
-[167631.157509] Add. Sense: Unrecovered read error
+Model Family:     Seagate Barracuda 7200.9
-[167631.157512] sd 11:0:0:0: [sdb] CDB:
+Device Model:     ST3160812AS
-[167631.157514] Read(10): 28 00 00 00 08 00 00 00 08 00
+Serial Number:    5LS68H19
-[167631.157524] end_request: critical medium error, dev sdb, sector 2048
+Firmware Version: 3.AHL
-[167631.157530] Buffer I/O error on device sdb1, logical block 0
+User Capacity:    160,041,885,696 bytes [160 GB]
-[167661.060928] sd 11:0:0:0: [sdb] Unhandled sense code
+Sector Size:      512 bytes logical/physical
-[167661.060934] sd 11:0:0:0: [sdb]
+Device is:        In smartctl database [for details use: -P show]
+ATA Version is:   ATA/ATAPI-7 (minor revision not indicated)
+Local Time is:    Fri May 19 16:26:32 2017 CEST
+SMART support is: Available - device has SMART capability.
+SMART support is: Enabled
+=== START OF READ SMART DATA SECTION ===
+SMART overall-health self-assessment test result: PASSED
+General SMART Values:
+Offline data collection status:  (0x82)	Offline data collection activity
+					was completed without error.
+					Auto Offline Data Collection: Enabled.
+Self-test execution status:      (   0)	The previous self-test routine completed
+					without error or no self-test has ever
+					been run.
+Total time to complete Offline
+data collection: 		(  433) seconds.
+Offline data collection
+capabilities: 			 (0x5b) SMART execute Offline immediate.
+					Auto Offline data collection on/off support.
+					Suspend Offline collection upon new
+					command.
+					Offline surface scan supported.
+					Self-test supported.
+					No Conveyance Self-test supported.
+					Selective Self-test supported.
+SMART capabilities:            (0x0003)	Saves SMART data before entering
+					power-saving mode.
+					Supports SMART auto save timer.
+Error logging capability:        (0x01)	Error logging supported.
+					General Purpose Logging supported.
+Short self-test routine
+recommended polling time: 	 (   2) minutes.
+Extended self-test routine
+recommended polling time: 	 (  54) minutes.
+SCT capabilities: 	       (0x0009)	SCT Status supported.
+					SCT Error Recovery Control supported.
+SMART Attributes Data Structure revision number: 10
+Vendor Specific SMART Attributes with Thresholds:
+ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
+Raw_Read_Error_Rate     0x000f   100   253   006    Pre-fail  Always       -       0
+Spin_Up_Time            0x0002   094   094   000    Old_age   Always       -       0
+Start_Stop_Count        0x0033   100   100   020    Pre-fail  Always       -       71
+Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       37
+Seek_Error_Rate         0x000f   085   060   030    Pre-fail  Always       -       356768337
+Power_On_Hours          0x0032   021   021   000    Old_age   Always       -       69653
+Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
+Power_Cycle_Count       0x0033   100   100   020    Pre-fail  Always       -       82
+Reported_Uncorrect      0x0032   068   068   000    Old_age   Always       -       32
+High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
+Airflow_Temperature_Cel 0x0022   063   063   045    Old_age   Always       -       37 (Min/Max 37/37)
+Temperature_Celsius     0x0022   037   040   000    Old_age   Always       -       37 (0 16 0 0 0)
+Hardware_ECC_Recovered  0x001a   102   048   000    Old_age   Always       -       124688544
+Current_Pending_Sector  0x0012   001   001   000    Old_age   Always       -       4403
+Offline_Uncorrectable   0x0010   001   001   000    Old_age   Offline      -       4403
+UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
+Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
+Data_Address_Mark_Errs  0x0032   100   253   000    Old_age   Always       -       0
+SMART Error Log Version: 1
+ATA Error Count: 167 (device log contains only the most recent five errors)
+	CR = Command Register [HEX]
+	FR = Features Register [HEX]
+	SC = Sector Count Register [HEX]
+	SN = Sector Number Register [HEX]
+	CL = Cylinder Low Register [HEX]
+	CH = Cylinder High Register [HEX]
+	DH = Device/Head Register [HEX]
+	DC = Device Command Register [HEX]
+	ER = Error register [HEX]
+	ST = Status register [HEX]
+Powered_Up_Time is measured from power on, and printed as
+DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
+SS=sec, and sss=millisec. It "wraps" after 49.710 days.
+Error 167 occurred at disk power-on lifetime: 4117 hours (171 days + 13 hours)
+  When the command that caused the error occurred, the device was active or idle.
+  After command completion occurred, registers were:
+  ER ST SC SN CL CH DH
+  -- -- -- -- -- -- --
+51 00 00 08 00 e0  Error: UNC at LBA = 0x00000800 = 2048
+  Commands leading to the command that caused the error were:
+  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
+  -- -- -- -- -- -- -- --  ----------------  --------------------
+00 08 00 08 00 e0 00      00:06:38.518  READ DMA EXT
+00 08 18 b8 4e e0 00      00:06:38.516  READ DMA EXT
+00 08 00 c0 4e e0 00      00:06:38.502  READ DMA EXT
+00 08 18 18 e9 e0 00      00:06:34.538  READ DMA EXT
+00 08 f8 0e e9 e0 00      00:06:30.491  READ DMA EXT
+Error 166 occurred at disk power-on lifetime: 4117 hours (171 days + 13 hours)
+  When the command that caused the error occurred, the device was active or idle.
+  After command completion occurred, registers were:
+  ER ST SC SN CL CH DH
+  -- -- -- -- -- -- --
+51 00 00 08 00 e0  Error: UNC at LBA = 0x00000800 = 2048
+  Commands leading to the command that caused the error were:
+  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
+  -- -- -- -- -- -- -- --  ----------------  --------------------
+00 08 00 08 00 e0 00      00:06:38.518  READ DMA EXT
+  ef 03 45 00 00 00 a0 00      00:06:38.516  SET FEATURES [Set transfer mode]
+00 08 00 00 00 00 04      00:06:38.502  NOP [Abort queued commands]
+00 08 00 08 00 e0 00      00:06:34.538  READ DMA EXT
+00 08 f8 b6 a2 e0 00      00:06:30.491  READ DMA EXT
+Error 165 occurred at disk power-on lifetime: 4117 hours (171 days + 13 hours)
+  When the command that caused the error occurred, the device was active or idle.
+  After command completion occurred, registers were:
+  ER ST SC SN CL CH DH
+  -- -- -- -- -- -- --
+51 00 00 08 00 e0  Error: UNC at LBA = 0x00000800 = 2048
+  Commands leading to the command that caused the error were:
+  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
+  -- -- -- -- -- -- -- --  ----------------  --------------------
+00 08 00 08 00 e0 00      00:05:58.830  READ DMA EXT
+00 08 f8 b6 a2 e0 00      00:05:54.874  READ DMA EXT
+00 10 f8 b7 a2 e0 00      00:05:50.836  READ DMA EXT
+00 08 f8 ae 4e e0 00      00:06:34.538  READ DMA EXT
+00 08 f8 af 4e e0 00      00:06:30.491  READ DMA EXT
+Error 164 occurred at disk power-on lifetime: 4117 hours (171 days + 13 hours)
+  When the command that caused the error occurred, the device was active or idle.
+  After command completion occurred, registers were:
+  ER ST SC SN CL CH DH
+  -- -- -- -- -- -- --
+51 00 00 08 00 e0  Error: UNC at LBA = 0x00000800 = 2048
+  Commands leading to the command that caused the error were:
+  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
+  -- -- -- -- -- -- -- --  ----------------  --------------------
+ 00 08 00 08 00 e0 00      00:05:58.830  READ DMA EXT
+ 00 08 00 b0 4e e0 00      00:05:54.874  READ DMA EXT
+  ef 03 45 00 00 00 a0 00      00:05:50.836  SET FEATURES [Set transfer mode]
+00 08 00 00 00 00 04      00:05:46.773  NOP [Abort queued commands]
+00 08 00 08 00 e0 00      00:05:46.726  READ DMA EXT
+Error 163 occurred at disk power-on lifetime: 4117 hours (171 days + 13 hours)
+  When the command that caused the error occurred, the device was active or idle.
+  After command completion occurred, registers were:
+  ER ST SC SN CL CH DH
+  -- -- -- -- -- -- --
+51 00 00 08 00 e0  Error: UNC at LBA = 0x00000800 = 2048
+  Commands leading to the command that caused the error were:
+  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
+  -- -- -- -- -- -- -- --  ----------------  --------------------
+00 08 00 08 00 e0 00      00:05:13.529  READ DMA EXT
+00 08 08 b8 4e e0 00      00:05:54.874  READ DMA EXT
+00 08 00 b8 4e e0 00      00:05:50.836  READ DMA EXT
+  ef 03 45 00 00 00 a0 00      00:05:46.773  SET FEATURES [Set transfer mode]
+00 08 00 00 00 00 04      00:05:46.726  NOP [Abort queued commands]
+SMART Self-test log structure revision number 1
+Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
+# 1  Short offline       Completed without error       00%         0         -
+SMART Selective self-test log data structure revision number 1
+ SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
+        0        0  Not_testing
+        0        0  Not_testing
+        0        0  Not_testing
+        0        0  Not_testing
+        0        0  Not_testing
+Selective self-test flags (0x0):
+  After scanning selected spans, do NOT read-scan remainder of disk.
+If Selective self-test is pending on power-up, resume after 0 minute delay.
+</file>
+En relació a l'error "Error: UNC at LBA = ..." consultar les recomanacions a:
+  * [[https://serverfault.com/questions/381012/is-unc-s-m-a-r-t-error-serious-need-to-take-action]]
+Per altra banda, aquesta es la traça de l'execució de la comanda ''sfdisk -l /dev/sdb''
+<file>
+root@cie-55-31:/home/sermnadmin/Documents/old-hdd-recovery/partition-backup# strace sfdisk -l /dev/sdb
+execve("/sbin/sfdisk", ["sfdisk", "-l", "/dev/sdb"], [/* 20 vars */]) = 0
+brk(0)                                  = 0xed4000
+access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
+mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f7386212000
+access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
+open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
+fstat(3, {st_mode=S_IFREG|0644, st_size=98535, ...}) = 0
+mmap(NULL, 98535, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f73861f9000
+close(3)                                = 0
+access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
+open("/lib/x86_64-linux-gnu/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
+read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P\34\2\0\0\0\0\0"..., 832) = 832
+fstat(3, {st_mode=S_IFREG|0755, st_size=1738176, ...}) = 0
+mmap(NULL, 3844640, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f7385c49000
+mprotect(0x7f7385dea000, 2097152, PROT_NONE) = 0
+mmap(0x7f7385fea000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1a1000) = 0x7f7385fea000
+mmap(0x7f7385ff0000, 14880, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f7385ff0000
+close(3)                                = 0
+mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f73861f8000
+mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f73861f7000
+mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f73861f6000
+arch_prctl(ARCH_SET_FS, 0x7f73861f7700) = 0
+mprotect(0x7f7385fea000, 16384, PROT_READ) = 0
+mprotect(0x611000, 4096, PROT_READ)     = 0
+mprotect(0x7f7386214000, 4096, PROT_READ) = 0
+munmap(0x7f73861f9000, 98535)           = 0
+brk(0)                                  = 0xed4000
+brk(0xef5000)                           = 0xef5000
+open("/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3
+fstat(3, {st_mode=S_IFREG|0644, st_size=1607712, ...}) = 0
+mmap(NULL, 1607712, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f738606d000
+close(3)                                = 0
+open("/dev/sdb", O_RDONLY)              = 3
+ioctl(3, HDIO_GETGEO, {heads=255, sectors=63, cylinders=19457, start=0}) = 0
+uname({sys="Linux", node="cie-55-31", ...}) = 0
+ioctl(3, BLKGETSIZE64, 160041885696)    = 0
+open("/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 4
+fstat(4, {st_mode=S_IFREG|0644, st_size=2492, ...}) = 0
+mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f7386211000
+read(4, "# Locale name alias data base.\n#"..., 4096) = 2492
+read(4, "", 4096)                       = 0
+close(4)                                = 0
+munmap(0x7f7386211000, 4096)            = 0
+open("/usr/share/locale/en_US.utf8/LC_MESSAGES/util-linux.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
+open("/usr/share/locale/en_US/LC_MESSAGES/util-linux.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
+open("/usr/share/locale/en.utf8/LC_MESSAGES/util-linux.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
+open("/usr/share/locale/en/LC_MESSAGES/util-linux.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
+fstat(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 8), ...}) = 0
+mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f7386211000
+write(1, "\n", 1
+)                       = 1
+write(1, "Disk /dev/sdb: 19457 cylinders, "..., 60Disk /dev/sdb: 19457 cylinders, 255 heads, 63 sectors/track
+) = 60
+lseek(3, 0, SEEK_SET)                   = 0
+read(3, "\353c\220\20\216\320\274\0\260\270\0\0\216\330\216\300\373\276\0|\277\0\6\271\0\2\363\244\352!\6\0"..., 512) = 512
+write(2, "sfdisk: ", 8sfdisk: )                 = 8
+write(2, "Warning: extended partition does"..., 121Warning: extended partition does not start at a cylinder boundary.
+DOS and Linux will interpret the contents differently.) = 121
+write(2, "\n", 1
+)                       = 1
+lseek(3, 20001586176, SEEK_SET)         = 20001586176
+read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 512) = 512
+lseek(3, 25000148992, SEEK_SET)         = 25000148992
+read(3, "\3310\3320\3330\3340\3350\3360\3370\3400\3410\3420\3430\3440\3450\3460\3470\3500"..., 512) = 512
+lseek(3, 37000052736, SEEK_SET)         = 37000052736
+read(3, "\17\377\0\0\330\315\0\0\t\233\0\0\303c\0\0`&\0\0\30\347\377\377\244\253\377\377\217s\377\377"..., 512) = 512
+lseek(3, 56999542784, SEEK_SET)         = 56999542784
+read(3, "9\246\f\0'O\5\0\232\n\1\0\356\223\6\0\236\307\n\0\360\226\1\0z?\363\377\222\303\355\377"..., 512) = 512
+write(1, "Units: cylinders of 8225280 byte"..., 74Units: cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
+) = 74
+write(1, "   Device Boot Start     End   #"..., 61   Device Boot Start     End   #cyls    #blocks   Id  System
+) = 61
+write(1, "/dev/sdb1   *      0+   2431-   "..., 60/dev/sdb1   *      0+   2431-   2432-  19530752   83  Linux
+) = 60
+write(1, "/dev/sdb2       2431+  19457-  1"..., 63/dev/sdb2       2431+  19457-  17026- 136757249    5  Extended
+) = 63
+write(1, "/dev/sdb3          0       -    "..., 60/dev/sdb3          0       -       0          0    0  Empty
+) = 60
+write(1, "/dev/sdb4          0       -    "..., 60/dev/sdb4          0       -       0          0    0  Empty
+) = 60
+write(1, "/dev/sdb5       2431+   3039-   "..., 60/dev/sdb5       2431+   3039-    608-   4881408   83  Linux
+) = 60
+write(1, "/dev/sdb6       3039+   4498-   "..., 75/dev/sdb6       3039+   4498-   1459-  11717632   82  Linux swap / Solaris
+) = 75
+write(1, "/dev/sdb7       4498+   6929-   "..., 60/dev/sdb7       4498+   6929-   2432-  19529728   83  Linux
+) = 60
+write(1, "/dev/sdb8       6929+  19457-  1"..., 60/dev/sdb8       6929+  19457-  12528- 100625408   83  Linux
+) = 60
+close(3)                                = 0
+close(1)                                = 0
+munmap(0x7f7386211000, 4096)            = 0
+close(2)                                = 0
+exit_group(0)                           = ?
++++ exited with 0 +++
 </file>
 ==== Disc dur anterior ====
@@ Line 763: / Line 1050: @@
 Per evitar que els usuaris facin ús dels ports USB per connectar pendrives o discos externs, o del lector de CD/DVD, edito el fitxer ///etc/group// i els bloquejo l'accés eliminant l'usuari //sermnuab// dels grups //cdrom// i //plugdev//.
+===== Impressora en PDF =====
+Instal·lo el paquet //printer-driver-cups-pdf// per crear una impressora virtual en fitxers PDF. Això fa que s'instal·li el gestor d'impressió [[https://www.cups.org/ | CUPS]] i que a la llista d'impressores surtin les que troba a la xarxa. Per eliminar-les desactivo el servei de descoberta d'impressores:
+<file>
+sermnadmin@cie-55-31:~$ sudo systemctl stop cups-browsed.service
+[sudo] password for sermnadmin:
+sermnadmin@cie-55-31:~$ sudo systemctl disable cups-browsed.service
+Synchronizing state for cups-browsed.service with sysvinit using update-rc.d...
+Executing /usr/sbin/update-rc.d cups-browsed defaults
+Executing /usr/sbin/update-rc.d cups-browsed disable
+insserv: warning: current start runlevel(s) (empty) of script `cups-browsed' overrides LSB defaults (2 3 4 5).
+insserv: warning: current stop runlevel(s) (0 1 2 3 4 5 6) of script `cups-browsed' overrides LSB defaults (0 1 6).
+sermnadmin@cie-55-31:~$ sudo systemctl status cups-browsed.service
+● cups-browsed.service - Make remote CUPS printers available locally
+   Loaded: loaded (/lib/systemd/system/cups-browsed.service; disabled)
+   Active: inactive (dead)
+May 31 12:47:30 cie-55-31 systemd[1]: Starting Make remote CUPS printers available locally...
+May 31 12:47:30 cie-55-31 systemd[1]: Started Make remote CUPS printers available locally.
+May 31 12:56:32 cie-55-31 systemd[1]: Stopping Make remote CUPS printers available locally...
+May 31 12:56:32 cie-55-31 systemd[1]: Stopped Make remote CUPS printers available locally.
+</file>
+i les impressores de xarxa despareixen i només queda la impressora virtual local.
+<WRAP alert>
+FIXME La impressió des de la pestanya //plot// del TopSpin dóna un error,
+<file>
+Printing has been cancelled:
+java.awt.print.PrinterIOException
+(Original message = Printing has been cancelled:
+java.awt.print.PrinterIOException)
+====================================================
+May 2017 13:12:06.490 +0200
+Topspin Version  = 3.5 pl 6 (of August 4 2016),build 1784
+JVM Version      = 1.8.0_102 (32 bit) Oracle Corporation
+JVM Total memory = 110 MB
+JVM Free  memory = 42 MB
+java.lang.Exception: Stack trace
+	at bruker.bio.topspin.bfw.gui.warn.AbstractMessage.getDetailsString(AbstractMessage.java:827)
+	at bruker.bio.topspin.bfw.gui.warn.AbstractMessage.setMsgSource(AbstractMessage.java:790)
+	at bruker.bio.topspin.bfw.gui.warn.AbstractMessage.<init>(AbstractMessage.java:774)
+	at de.bruker.nmr.mfw.base.BWarning.<init>(BWarning.java:102)
+	at de.bruker.nmr.mfw.base.BError.<init>(BError.java:93)
+	at de.bruker.nmr.mfw.base.BError.<init>(BError.java:72)
+	at de.bruker.nmr.pr.plot.media.MediaFactory.doPrint(MediaFactory.java:583)
+	at de.bruker.nmr.pr.plot.LayoutEditor$PlotPreviewHelperThread.run(LayoutEditor.java:1059)
+</file>
+Per trobar una solució, consultar els enllaços:
+  * [[https://docs.oracle.com/javase/7/docs/api/java/awt/print/PrinterIOException.html]]
+  * [[https://stackoverflow.com/questions/17694722/java-awt-print-printerexception-printer-is-not-accepting-job]]
+  * [[http://copy-con.blogspot.com.es/2009/12/printer-is-not-accepting-job.html]]
+  * [[https://www.questarter.com/q/java-printing-with-cups-printers-not-found-3_860495.html]]
+  * [[https://www.experts-exchange.com/questions/28406389/Custom-VKP80-Printer-is-not-printing-anything-at-all.html]]
+  * [[http://www.cups-pdf.de]]
+  * ...
+</WRAP>

SeRMN Wiki

User Tools

Site Tools

Differences

Page Tools