Maintenance and Cleaning
The System Owner is responsible for ensuring that the device is always in a technically faultless condition. Therefore, the following applies:
- ▪
- The System Owner must ensure that the tasks and maintenance intervals for the instrument described in this manual in section Maintenance are fulfilled.
- ▪
- The System Owner must ensure that all safety devices are regularly checked to ensure full functionality and completeness.
- ▪
- Last no least, cleaning or disinfection and decontamination (PET/MR or PET/CT) needs to be addressed and taken care of appropriately by the System Owner.
| | |
Health hazard while cleaning the device (worker protection) Compliance with occupational safety and health regulations are in the responsibility of the System Owner (responsible body). - •
- Before starting to clean the instrument, make sure that radioactivity is completely removed from the instrument and correct decay times have been applied (PET/MR and PET/CT instruments).
- •
- Wear appropriate protective gear. As gloves, impervious gloves, e.g., latex or nitrile are recommended.
- •
- When handling or using any cleaner, consult the manufacturer’s Material Safety Data Sheet (MSDS) for additional information prior to use.
|
