Starting Wobble Using “Start” (Automatic Adjustment)
For coil elements using varicaps, wobble can be started as automatic adjustment. An underlying algorithm performs the otherwise manual steps of tuning and matching automatically. Its performance can be supervised in the “Acq/Reco Display”.
The resulting tune and match values are stored within the context of the current study. They can also be manually stored for all studies which use the identical coil configuration.
Storing the wobble curve:
When performing wobble as auto-adjustment the parameter Store Wobbleresult on the Result Card can be set to save the wobble curve itself as an adjustment result. The curve can be stored, no matter if the coil can actually be wobbled automatically or not.
The following table summarizes the performed actions when pressing Start:
Coil | Stored Wobbleresult disabled | Stored Wobbleresult enabled |
|---|---|---|
No varicaps | - Nothing is done. The adjustement | - A single wobble curve is recorded |
Varicaps | - The coil element is wobbled - The resulting tune/match values | - The coil element is wobbled - The final wobble curve is stored |
