Specific Handling
Mouse Preparation
Please see user manual of the animal bed.
Coil Position / Fixation
- Turn the coil on the support using the red knob to unlock.
- Then shift the coil on the support to the preparation position away from the mouse head i.e. measurement position.
- Attach the coil to the animal cradle where TIP 23 mm is already fixed.
- Shift the coil carefully over the animal to the measurement position until it is locked.
|
|
|
|
|
|
|
|
|
Mouse on Animal Cradle with TIP 23 mm |
Coil attached / in preparation position |
Coil attached / in measurement position |
- Push the coil connector through the magnet bore
- attach the cradle to the holding device
- insert the cradle with the coil into the magnet center
Coil Adjustment
The coil is designed as no tune / no match.
