Specific Handling
Workflow for Application
- Remove all other RF coils inside the magnet
- Insert the coil from the Service End and connect it to the coil socket
- Prepare the rat or mouse animal cradle with the corresponding TIP
- Prepare the animal on the cradle and fix gas nose cone and tooth bar
- Attach the cradle to the AUTOPAC or slider at the preparation table
- In front of the magnet bore: Shift the coil all the way onto the animal cradle (1)
- Lock the coil (2)
- Tune / match the coil outside the magnet
- Move the entire setup into the magnet and align the coil center mark with the magnet center.
