This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
informatica:hp_xw4400_600 [2012/05/18 16:49] miquel [CPU Specifications (cpuinfo)] |
— (current) | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ====== Estació de treball HP xw4400 de l' | ||
| - | |||
| - | ===== Hardware specifications ===== | ||
| - | |||
| - | < | ||
| - | [root@cie-55-31 ~]# lshw | ||
| - | cie-55-31 | ||
| - | description: | ||
| - | product: HP xw4400 Workstation | ||
| - | vendor: Hewlett-Packard | ||
| - | serial: CZC70116S7 | ||
| - | width: 32 bits | ||
| - | capabilities: | ||
| - | configuration: | ||
| - | *-core | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | description: | ||
| - | vendor: Hewlett-Packard | ||
| - | physical id: 1 | ||
| - | version: 786D7 v01.03 (09/ | ||
| - | size: 128KB | ||
| - | capacity: 960KB | ||
| - | capabilities: | ||
| - | | ||
| - | description: | ||
| - | product: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz | ||
| - | vendor: Intel Corp. | ||
| - | physical id: 5 | ||
| - | bus info: cpu@0 | ||
| - | version: 6.15.6 | ||
| - | serial: 0000-06F6-0000-0000-0000-0000 | ||
| - | slot: XU1 PROCESSOR | ||
| - | size: 2400MHz | ||
| - | width: 64 bits | ||
| - | clock: 1066MHz | ||
| - | capabilities: | ||
| - | configuration: | ||
| - | *-cache:0 | ||
| - | | ||
| - | | ||
| - | slot: Internal L1 Cache | ||
| - | size: 64KB | ||
| - | | ||
| - | | ||
| - | *-cache:1 | ||
| - | | ||
| - | | ||
| - | slot: Cache L2 | ||
| - | size: 4MB | ||
| - | | ||
| - | | ||
| - | *-logicalcpu: | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | *-logicalcpu: | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | description: | ||
| - | vendor: Intel | ||
| - | physical id: 6 | ||
| - | bus info: cpu@1 | ||
| - | version: 6.15.6 | ||
| - | serial: 0000-06F6-0000-0000-0000-0000 | ||
| - | slot: XU1 PROCESSOR 2 | ||
| - | size: 2400MHz | ||
| - | clock: 1066MHz | ||
| - | capabilities: | ||
| - | configuration: | ||
| - | *-cache:0 DISABLED | ||
| - | | ||
| - | | ||
| - | slot: Internal L1 Cache | ||
| - | | ||
| - | *-cache:1 DISABLED | ||
| - | | ||
| - | | ||
| - | slot: Cache L2 | ||
| - | | ||
| - | | ||
| - | *-logicalcpu: | ||
| - | | ||
| - | | ||
| - | | ||
| - | *-logicalcpu: | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | description: | ||
| - | physical id: 36 | ||
| - | slot: System board or motherboard | ||
| - | *-bank:0 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | slot: XMM1 | ||
| - | size: 512MB | ||
| - | | ||
| - | | ||
| - | *-bank:1 | ||
| - | | ||
| - | | ||
| - | | ||
| - | slot: XMM2 | ||
| - | *-bank:2 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | slot: XMM3 | ||
| - | size: 512MB | ||
| - | | ||
| - | | ||
| - | *-bank:3 | ||
| - | | ||
| - | | ||
| - | | ||
| - | slot: XMM4 | ||
| - | | ||
| - | description: | ||
| - | physical id: 37 | ||
| - | slot: System board or motherboard | ||
| - | capacity: 1MB | ||
| - | *-bank UNCLAIMED | ||
| - | | ||
| - | | ||
| - | slot: SYSTEM ROM | ||
| - | size: 1MB | ||
| - | | ||
| - | | ||
| - | physical id: 0 | ||
| - | | ||
| - | physical id: 2 | ||
| - | *-pci | ||
| - | description: | ||
| - | product: 975X Express Memory Controller Hub | ||
| - | vendor: Intel Corporation | ||
| - | physical id: 100 | ||
| - | bus info: pci@00:00.0 | ||
| - | version: 00 | ||
| - | width: 32 bits | ||
| - | clock: 33MHz | ||
| - | *-pci:0 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | bus info: pci@00:01.0 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | description: | ||
| - | product: Quadro FX 560 | ||
| - | vendor: nVidia Corporation | ||
| - | physical id: 0 | ||
| - | bus info: pci@01:00.0 | ||
| - | version: a1 | ||
| - | size: 256MB | ||
| - | width: 64 bits | ||
| - | clock: 33MHz | ||
| - | capabilities: | ||
| - | configuration: | ||
| - | resources: iomemory: | ||
| - | *-multimedia | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | bus info: pci@00:1b.0 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | *-pci:1 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | bus info: pci@00:1c.0 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | *-pci:2 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | bus info: pci@00:1c.4 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | description: | ||
| - | product: NetXtreme BCM5751 Gigabit Ethernet PCI Express | ||
| - | vendor: Broadcom Corporation | ||
| - | physical id: 0 | ||
| - | bus info: pci@28:00.0 | ||
| - | logical name: eth0 | ||
| - | version: 21 | ||
| - | serial: 00: | ||
| - | size: 100MB/s | ||
| - | capacity: 1GB/s | ||
| - | width: 64 bits | ||
| - | clock: 33MHz | ||
| - | capabilities: | ||
| - | configuration: | ||
| - | resources: iomemory: | ||
| - | *-pci:3 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | bus info: pci@00:1c.5 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | description: | ||
| - | product: NetXtreme BCM5755 Gigabit Ethernet PCI Express | ||
| - | vendor: Broadcom Corporation | ||
| - | physical id: 0 | ||
| - | bus info: pci@3f:00.0 | ||
| - | logical name: eth1 | ||
| - | version: 02 | ||
| - | serial: 00: | ||
| - | size: 100MB/s | ||
| - | capacity: 1GB/s | ||
| - | width: 64 bits | ||
| - | clock: 33MHz | ||
| - | capabilities: | ||
| - | configuration: | ||
| - | resources: iomemory: | ||
| - | *-usb:0 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | bus info: pci@00:1d.0 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | product: UHCI Host Controller | ||
| - | vendor: Linux 2.6.9-42.0.3.ELsmp uhci_hcd | ||
| - | physical id: 1 | ||
| - | bus info: usb@2 | ||
| - | logical name: usb2 | ||
| - | version: 2.06 | ||
| - | capabilities: | ||
| - | configuration: | ||
| - | *-usb:0 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | bus info: usb@2:1 | ||
| - | | ||
| - | | ||
| - | | ||
| - | *-usb:1 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | bus info: usb@2:2 | ||
| - | | ||
| - | | ||
| - | | ||
| - | *-usb:1 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | bus info: pci@00:1d.1 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | product: UHCI Host Controller | ||
| - | vendor: Linux 2.6.9-42.0.3.ELsmp uhci_hcd | ||
| - | physical id: 1 | ||
| - | bus info: usb@3 | ||
| - | logical name: usb3 | ||
| - | version: 2.06 | ||
| - | capabilities: | ||
| - | configuration: | ||
| - | *-usb:2 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | bus info: pci@00:1d.2 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | product: UHCI Host Controller | ||
| - | vendor: Linux 2.6.9-42.0.3.ELsmp uhci_hcd | ||
| - | physical id: 1 | ||
| - | bus info: usb@4 | ||
| - | logical name: usb4 | ||
| - | version: 2.06 | ||
| - | capabilities: | ||
| - | configuration: | ||
| - | *-usb:3 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | bus info: pci@00:1d.3 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | product: UHCI Host Controller | ||
| - | vendor: Linux 2.6.9-42.0.3.ELsmp uhci_hcd | ||
| - | physical id: 1 | ||
| - | bus info: usb@5 | ||
| - | logical name: usb5 | ||
| - | version: 2.06 | ||
| - | capabilities: | ||
| - | configuration: | ||
| - | *-usb:4 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | bus info: pci@00:1d.7 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | product: EHCI Host Controller | ||
| - | vendor: Linux 2.6.9-42.0.3.ELsmp ehci_hcd | ||
| - | physical id: 1 | ||
| - | bus info: usb@1 | ||
| - | logical name: usb1 | ||
| - | version: 2.06 | ||
| - | capabilities: | ||
| - | configuration: | ||
| - | *-pci:4 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | bus info: pci@00:1e.0 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | *-isa | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | bus info: pci@00:1f.0 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | *-ide | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | bus info: pci@00:1f.1 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | *-ide | ||
| - | description: | ||
| - | physical id: 0 | ||
| - | bus info: ide@0 | ||
| - | logical name: ide0 | ||
| - | clock: 33MHz | ||
| - | *-cdrom | ||
| - | | ||
| - | | ||
| - | | ||
| - | bus info: ide@0.0 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | physical id: 0 | ||
| - | logical name: /dev/hda | ||
| - | *-storage | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | bus info: pci@00:1f.2 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | description: | ||
| - | product: ST3160812AS | ||
| - | vendor: ATA | ||
| - | physical id: 0.0.0 | ||
| - | bus info: scsi@0: | ||
| - | logical name: /dev/sda | ||
| - | version: 3.AH | ||
| - | serial: 5LS68H19 | ||
| - | size: 149GB | ||
| - | capabilities: | ||
| - | configuration: | ||
| - | *-volume:0 | ||
| - | | ||
| - | | ||
| - | bus info: scsi@0: | ||
| - | | ||
| - | | ||
| - | | ||
| - | *-volume:1 | ||
| - | | ||
| - | | ||
| - | bus info: scsi@0: | ||
| - | | ||
| - | | ||
| - | | ||
| - | *-volume:2 | ||
| - | | ||
| - | | ||
| - | bus info: scsi@0: | ||
| - | | ||
| - | | ||
| - | | ||
| - | *-volume:3 | ||
| - | | ||
| - | | ||
| - | bus info: scsi@0: | ||
| - | | ||
| - | | ||
| - | | ||
| - | [root@cie-55-31 ~]# | ||
| - | </ | ||
| - | |||
| - | ===== CPU Specifications (cpuinfo) ===== | ||
| - | |||
| - | < | ||
| - | [root@cie-55-31 proc]# more cpuinfo | ||
| - | processor | ||
| - | vendor_id | ||
| - | cpu family | ||
| - | model : 15 | ||
| - | model name : Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz | ||
| - | stepping | ||
| - | cpu MHz : 2400.658 | ||
| - | cache size : 4096 KB | ||
| - | physical id : 0 | ||
| - | siblings | ||
| - | core id : 0 | ||
| - | cpu cores : 2 | ||
| - | fdiv_bug | ||
| - | hlt_bug | ||
| - | f00f_bug | ||
| - | coma_bug | ||
| - | fpu : yes | ||
| - | fpu_exception | ||
| - | cpuid level : 10 | ||
| - | wp : yes | ||
| - | flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov | ||
| - | pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm pni monitor ds_c | ||
| - | pl est tm2 xtpr | ||
| - | bogomips | ||
| - | </ | ||
| - | |||
| - | ===== Descripció tècnica ===== | ||
| - | |||
| - | ==== Dades per l' | ||
| - | |||
| - | ^ Descripció | ||
| - | ^ Marca | Hewlett Packard | ||
| - | ^ Model | HP FIXME | | ||
| - | ^ Núm. sèrie | ||
| - | ^ Núm. referència | ||
| - | ^ Potència | ||
| - | ^ Emplaçament | ||
| - | |||
| - | ==== Estació de treball per l' | ||
| - | |||
| - | ^ PC HP Z400 - AVANCE-II+ 600MHZ | ||
| - | ^ Data de compra | ||
| - | ^ DHCP UAB ^^ | ||
| - | ^ Data d' | ||
| - | ^ Adreça MAC | 3CD92B73EA93 | ||
| - | ^ Hostname | ||
| - | ^ Adreça IP | 158.109.56.18 | ||
| - | ^ DADES TÈCNIQUES | ||
| - | ^ Descripció | ||
| - | ^ Marca | Hewlett Packard | ||
| - | ^ Model | HP Z400 HDD 1TB | | ||
| - | ^ Núm. sèrie | ||
| - | ^ Núm. referència | ||
| - | ^ Potència | ||
| - | ^ Emplaçament | ||
| - | ^ HP Care Pack | no cal. Garantia de 3 anys inclosa al producte | ||
| - | ^ WINDOWS 7 PROFESSIONAL 64-BITS | ||
| - | ^ Product Key | V4V76-H4BPD-JK2KM-7M4BD-2PYB7 | ||
| - | ^ --- | X16 - 96076 | | ||
| - | ^ Barcode | ||
| - | ^ HP Barcode | ||
| - | |||
| - | ==== Targeta gràfica ==== | ||
| - | |||
| - | Al final, la targeta gràfica **NVIDIA Quadro FX580, 512MB, PCI-E** no estava disponible i l'he substituïda pel model equivalent més nou: **NVIDIA Quadro FX600, 1024MB, PCI-E**, | ||
| - | * Manual: [[http:// | ||
| - | * Drivers: [[http:// | ||
| - | |||
| - | ===== Instal·lació de Debian GNU/Linux ===== | ||
| - | |||
| - | La distribució de GNU/Linux instal·lada és la **Debian version 6.0.3, released on October 8th, 2011, codenamed squeeze, AMD64 architecture, | ||
| - | |||
| - | ==== Configuració inicial ==== | ||
| - | |||
| - | * Language: English | ||
| - | * Country: Spain | ||
| - | * Locale: en_US.UTF-8 | ||
| - | * Keymap: Spanish | ||
| - | * Host name: cie-55-31 | ||
| - | * Domain name: uab.es | ||
| - | * User name: | ||
| - | * sermnuab | ||
| - | * sermnadmin | ||
| - | * Time zone: Madrid | ||
| - | |||
| - | ==== Partició del disc ==== | ||
| - | |||
| - | Partició a l' | ||
| - | < | ||
| - | [root@cie-55-32 ~]# df -hT -t ext3 | ||
| - | Filesystem | ||
| - | / | ||
| - | / | ||
| - | / | ||
| - | </ | ||
| - | |||
| - | Partició a l' | ||
| - | < | ||
| - | [nmrsu@cie-55-31 ~]$ df -hT -t ext3 | ||
| - | Filesystem | ||
| - | / | ||
| - | / | ||
| - | / | ||
| - | </ | ||
| - | |||
| - | Partició al servidor amb Debian-AMD64 | ||
| - | < | ||
| - | sermn@cie-59-222: | ||
| - | Filesystem | ||
| - | / | ||
| - | / | ||
| - | / | ||
| - | / | ||
| - | / | ||
| - | </ | ||
| - | |||
| - | A partir d' | ||
| - | * Partició primària **/ (root)** de 20 GB. Inclou ''/ | ||
| - | * Partició lògica **/var** de 5 GB. | ||
| - | * Partició swap de 12 GB. | ||
| - | * Partició lògica **/opt** de 20 GB. Pel Topspin i altre programari Bruker. | ||
| - | * Partició lògica **/home** de 907,5 GB (resta d' | ||
| - | |||
| - | < | ||
| - | root@cie-56-18:/# | ||
| - | |||
| - | Disk /dev/sda: 121601 cylinders, 255 heads, 63 sectors/ | ||
| - | Warning: extended partition does not start at a cylinder boundary. | ||
| - | DOS and Linux will interpret the contents differently. | ||
| - | Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 | ||
| - | |||
| - | | ||
| - | / | ||
| - | / | ||
| - | / | ||
| - | / | ||
| - | / | ||
| - | / | ||
| - | / | ||
| - | / | ||
| - | </ | ||
| - | |||
| - | Les particions //sda1// i //sda2// contenen la instal·lació original de Windows 7. | ||
| - | |||
| - | ==== Instal·lació i configuració de Debian ==== | ||
| - | |||
| - | === Instal·lació bàsica de programes === | ||
| - | |||
| - | Les // | ||
| - | * Desktop Environment | ||
| - | * Standard System | ||
| - | |||
| - | La resta de programes que poguessin ser necessaris, s' | ||
| - | |||
| - | == GRUB Boot Loader == | ||
| - | |||
| - | GRUB Boot Loader s' | ||
| - | |||
| - | == Reiniciar per primer cop == | ||
| - | |||
| - | Un cop s'han instal·lat tots els paquets, reinicio l' | ||
| - | |||
| - | === Simplificació de l' | ||
| - | |||
| - | Simplifico l' | ||
| - | * Elimino el panel inferior. Abans de fer-ho, moc els applets //Window List// i //Workspace Switcher// al panel superior. | ||
| - | * Elimino els applets // | ||
| - | * Al //Workspace Switcher// redueixo el nombre d' | ||
| - | * Canvio la configuració del //Workpsace Switcher// | ||
| - | * Show windows from all workspaces | ||
| - | * Group windows when space is limited | ||
| - | * Restore to native workspace (les finestres minimitzades s' | ||
| - | * Afegeixo els applets //Lock Screen Button// per bloquejar la pantalla, i //Log Out Button// per sortir de la sessió o per canviar a un altre usuari. | ||
| - | |||
| - | Edito el menú per amagar les aplicacions que no vull que vegin els usuaris (jocs i altres entreteniments). Més endavant miraré d' | ||
| - | * L' | ||
| - | * L' | ||
| - | * ... | ||
| - | |||
| - | === Addició d' | ||
| - | |||
| - | Afegeixo altres magatzems (repositories) de programes: | ||
| - | * deb http:// | ||
| - | * deb http:// | ||
| - | i la signatura (debian-multimedia-keyring) del magatzem // | ||
| - | * Adobe Acrobat Reader | ||
| - | |||
| - | === Altres paquets i programes de Debian === | ||
| - | |||
| - | Afegeixo els següents paquets o programes (aquest no és un llistat exhaustiu, només inclou els dimonis i servidors de xarxa, i altres programes importants): | ||
| - | * ssh (openssh-server, | ||
| - | * mc (midnight commander) | ||
| - | * rsync | ||
| - | * ftp-ssl en comptes de ftp | ||
| - | * denyhosts | ||
| - | * nfs-kernel-server | ||
| - | * tftp-hpa | ||
| - | * tftpd-hpa <color black/ | ||
| - | * bootparamd <color black/ | ||
| - | * xinetd (en comptes del programa per defecte: openbsd-inetd) | ||
| - | |||
| - | Elimino els paquets o programes: | ||
| - | * telnet | ||
| - | * ... | ||
| - | |||
| - | Elimino els següents metapackages per poder eliminar altres paquets o programes que depenen d'ells sense haver de desinstal·lar altres paquets que sí que m' | ||
| - | * gnome | ||
| - | * gnome-desktop-environment | ||
| - | * gnome-office | ||
| - | |||
| - | Llavors desinstal·lo: | ||
| - | * gnome-games, | ||
| - | * simple-scan, | ||
| - | * ... | ||
| - | |||
| - | Substitueixo la versió lliure de Java ('' | ||
| - | |||
| - | === Configuració de la xarxa === | ||
| - | |||
| - | Actualment la configuració de la xarxa de la UAB la proporciona un servidor de DHCP. Per evitar que la caiguda de la xarxa afecti el funcionament de l' | ||
| - | * Hostname: cie-55-31 | ||
| - | * Domain: uab.es | ||
| - | * IP address: 158.109.55.31 | ||
| - | * Broadcast: 158.109.63.255 | ||
| - | * Netmask: 255.255.240.0 | ||
| - | * DNS: | ||
| - | * domain uab.es | ||
| - | * search uab.es | ||
| - | * nameserver 158.109.0.9 | ||
| - | * nameserver 158.109.254.130 | ||
| - | * nameserver 158.109.0.1 | ||
| - | |||
| - | La configuració de més amunt és l' | ||
| - | < | ||
| - | eth0 Link encap: | ||
| - | inet addr: | ||
| - | inet6 addr: fec0:: | ||
| - | inet6 addr: 2002: | ||
| - | inet6 addr: fe80:: | ||
| - | UP BROADCAST RUNNING MULTICAST | ||
| - | RX packets: | ||
| - | TX packets: | ||
| - | collisions: | ||
| - | RX bytes: | ||
| - | Interrupt: | ||
| - | </ | ||
| - | i ha estat obtinguda del servidor de DHCP de la universitat, | ||
| - | < | ||
| - | # more resolv.conf | ||
| - | # Generated by NetworkManager | ||
| - | domain uab.es | ||
| - | search uab.es | ||
| - | nameserver 158.109.0.9 | ||
| - | nameserver 158.109.254.130 | ||
| - | nameserver 158.109.0.1 | ||
| - | </ | ||
| - | |||
| - | La targeta de xarxa addicional també es reconeix, | ||
| - | < | ||
| - | eth1 Link encap: | ||
| - | UP BROADCAST MULTICAST | ||
| - | RX packets:0 errors:0 dropped:0 overruns:0 frame:0 | ||
| - | TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 | ||
| - | collisions: | ||
| - | RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) | ||
| - | Interrupt: | ||
| - | </ | ||
| - | però no té una configuració assignada. Caldrà configurar-la de forma estàtica amb els paràmetres de connexió emprats actualment per la connexió de l' | ||
| - | |||
| - | === Paquets i programes de Debian === | ||
| - | |||
| - | Com que la configuració de la xarxa és estàtica, per evitar problemes elimino, | ||
| - | * network-manager i network-manager-gnome, | ||
| - | * isc-dhcp i isc-dhpc-common, | ||
| - | i instal·lo | ||
| - | * net-tools, i | ||
| - | * ifupdown-extra, | ||
| - | * ethtools, i | ||
| - | * iputils-arping | ||
| - | |||
| - | === Configuració de les targetes de xarxa === | ||
| - | |||
| - | Per evitar que en algun moment es pugui bescanviar la configuració de les targetes de xarxa poso en pràctica les opcions esmentades a [[http:// | ||
| - | |||
| - | Una opció seria fer servir el programa '' | ||
| - | |||
| - | Però una consulta al fitxer // | ||
| - | < | ||
| - | root@cie-55-31:/ | ||
| - | # This file was automatically generated by the / | ||
| - | # program, run by the persistent-net-generator.rules rules file. | ||
| - | # | ||
| - | # You can modify it, as long as you keep each rule on a single | ||
| - | # line, and change only the value of the NAME= key. | ||
| - | |||
| - | # PCI device 0x14e4: | ||
| - | SUBSYSTEM==" | ||
| - | ATTR{dev_id}==" | ||
| - | |||
| - | # PCI device 0x1186: | ||
| - | SUBSYSTEM==" | ||
| - | ATTR{dev_id}==" | ||
| - | </ | ||
| - | |||
| - | Així doncs, podem fer servir //eth0// i //eth1// al fitxer de configuració // | ||
| - | |||
| - | === Bibliografia === | ||
| - | |||
| - | * [[http:// | ||
| - | * [[http:// | ||
| - | * [[http:// | ||
| - | * [[http:// | ||
| - | * ... | ||
| - | |||
| - | === Fitxers de configuració provissionals === | ||
| - | |||
| - | Aquesta és la configuració de xarxa provissional emprada per la instal·lació i configuració del sistema operatiu i del programa TopSpin. | ||
| - | |||
| - | **/ | ||
| - | |||
| - | < | ||
| - | 127.0.0.1 localhost | ||
| - | 127.0.1.1 cie-55-31.uab.es cie-55-31 | ||
| - | </ | ||
| - | |||
| - | **/ | ||
| - | |||
| - | < | ||
| - | # Generated by NetworkManager | ||
| - | domain uab.es | ||
| - | search uab.es | ||
| - | nameserver 158.109.0.9 | ||
| - | nameserver 158.109.254.130 | ||
| - | nameserver 158.109.0.1 | ||
| - | </ | ||
| - | |||
| - | **/ | ||
| - | |||
| - | < | ||
| - | # This file describes the network interfaces available on your system | ||
| - | # and how to activate them. For more information, | ||
| - | |||
| - | # The loopback network interface | ||
| - | auto lo | ||
| - | iface lo inet loopback | ||
| - | |||
| - | # Ethernet interfaces are assigned to physical devices in a | ||
| - | # persistent way according to rules in file: | ||
| - | # | ||
| - | # / | ||
| - | # | ||
| - | # Hence, each of eth0 and eth1 will **always** correspond to | ||
| - | # the same device. The configuration below assumes that, | ||
| - | # | ||
| - | # eth0 -> lan (internet) | ||
| - | # eth1 -> nmr (spectrometer ccu or ipso) | ||
| - | # | ||
| - | auto eth0 eth1 | ||
| - | |||
| - | # LAN / INTERNET - Assigned to the primary network interface, | ||
| - | # which usually will be the motherboard integrated NIC. | ||
| - | # | ||
| - | iface eth0 inet static | ||
| - | address 158.109.55.31 | ||
| - | netmask 255.255.240.0 | ||
| - | broadcast 158.109.63.255 | ||
| - | gateway 158.109.0.3 | ||
| - | |||
| - | # NMR CONSOLE LAN - Assigned to the secondary network interface, | ||
| - | # which usually will be the added NIC. | ||
| - | # | ||
| - | iface eth1 inet static | ||
| - | address 149.236.99.255 | ||
| - | netmask 255.255.255.0 | ||
| - | network 149.236.99.0 | ||
| - | broadcast 10.10.255.255 | ||
| - | </ | ||
| - | |||
| - | **/ | ||
| - | |||
| - | < | ||
| - | # This file was automatically generated by the / | ||
| - | # program, run by the persistent-net-generator.rules rules file. | ||
| - | # | ||
| - | # You can modify it, as long as you keep each rule on a single | ||
| - | # line, and change only the value of the NAME= key. | ||
| - | |||
| - | # PCI device 0x14e4: | ||
| - | SUBSYSTEM==" | ||
| - | ATTR{dev_id}==" | ||
| - | |||
| - | # PCI device 0x1186: | ||
| - | SUBSYSTEM==" | ||
| - | ATTR{dev_id}==" | ||
| - | </ | ||
| - | |||
| - | === Configuració de serveis === | ||
| - | |||
| - | == Avahi == | ||
| - | |||
| - | FIXME S'ha de configurar (fitxer ''/ | ||
| - | |||
| - | == Trivial FTP daemon == | ||
| - | |||
| - | Enllaços sobre la configuració del // | ||
| - | |||
| - | * http:// | ||
| - | * http:// | ||
| - | * ... | ||
| - | |||
| - | == Bootparam == | ||
| - | |||
| - | Cal configurar-lo per servir el sistema operatiu de la consola. | ||
| - | |||
| - | == NFS == | ||
| - | |||
| - | Cal configurar-lo per servir el sistema operatiu de la consola. | ||
| - | |||
| - | == NTP == | ||
| - | |||
| - | Instal·lo el paquet //ntp// i al final del fitxer /// | ||
| - | * server swisstime.ethz.ch | ||
| - | * server ntp.uab.es | ||
| - | * server ntp.univ-lyon1.fr | ||
| - | * | ||
| - | === Altres programes no procedents de Debian === | ||
| - | |||
| - | Afegeixo els programes: | ||
| - | * Firefox del lloc web de Mozilla | ||
| - | * Filezilla? :warn: potser no cal, perquè el gestor de fitxers ja incorpora un client de ftp/ssh. | ||
| - | * ... | ||
| - | |||
| - | ==== Hardware especial ==== | ||
| - | |||
| - | === Drivers per la targeta gràfica === | ||
| - | |||
| - | Instal·lo els drivers més actuals disponibles a debian-backports. | ||
| - | |||
| - | Per més informació consultar: | ||
| - | * http:// | ||
| - | * http:// | ||
| - | * http:// | ||
| - | * http:// | ||
| - | * ... | ||
| - | |||
| - | Per veure si es poden connectar dos monitors consultar: | ||
| - | * http:// | ||
| - | * http:// | ||
| - | * http:// | ||
| - | * http:// | ||
| - | * http:// | ||
| - | * http:// | ||
| - | * http:// | ||
| - | * ... | ||
| - | |||
| - | === Drivers per la 2a targeta de xarxa === | ||
| - | |||
| - | Aparentment no cal instal·lar cap driver especial ja que la targeta és suportada per GNU/Linux, però per si de cas, aquests són alguns enllaços relacionats amb aquest model de targeta: | ||
| - | * [[http:// | ||
| - | * [[http:// | ||
| - | * [[http:// | ||
| - | * [[http:// | ||
| - | |||
| - | === Drivers per la targeta amb ports sèrie === | ||
| - | |||
| - | La targeta és reconeguda i configurada pel sistema, no cal instal·lar cap controlador addicional, | ||
| - | < | ||
| - | [ 0.688353] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | ||
| - | [ 0.688545] | ||
| - | [ 0.688546] | ||
| - | [ 0.688550] serial 0000: | ||
| - | [ 0.688562] 2 ports detected on Oxford PCI Express device | ||
| - | [ 0.688613] ttyS0: detected caps 00000700 should be 00000100 | ||
| - | [ 0.688617] 0000: | ||
| - | [ 0.688670] ttyS1: detected caps 00000700 should be 00000100 | ||
| - | [ 0.688674] 0000: | ||
| - | </ | ||
| - | |||
| - | ==== Configuració de la BIOS ==== | ||
| - | |||
| - | FIXME Quan tot estigui funcionant caldrà verificar la configuració de la BIOS, per exemple, per protegir l' | ||
| - | |||
| - | ==== Securing Debian GNU/Linux ==== | ||
| - | |||
| - | * [[http:// | ||
| - | * [[http:// | ||
| - | * [[wp> | ||
| - | * [[http:// | ||
| - | * [[http:// | ||
| - | * [[http:// | ||
| - | |||
| - | ==== Altres millores a Debian ==== | ||
| - | |||
| - | === Devil' | ||
| - | |||
| - | * [[http:// | ||
| - | * [[https:// | ||
| - | * [[http:// | ||
| - | * [[http:// | ||
| - | |||
| - | === Teamviewer === | ||
| - | |||
| - | * [[http:// | ||
| - | |||
| - | === Configuració de GNOME === | ||
| - | |||
| - | Consultar els següents enllaços sobre cóm millorar o personalitzar el comportament de Gnome | ||
| - | * [[https:// | ||
| - | * [[https:// | ||
| - | * [[https:// | ||
| - | |||
| - | ===== Instal·lació del Topspin ===== | ||
| - | |||
| - | * [[informatica: | ||
| - | * [[informatica: | ||
| - | |||