Differences

This shows you the differences between two versions of the page.

--- informatica:hp_z400_600_topspin363_1 [2021/08/19 13:11]
miquel [Configuració de l'espectròmetre]
+++ informatica:hp_z400_600_topspin363_1 [2021/08/19 16:09] (current)
miquel [Configuració de l'espectròmetre]
@@ Line 1: / Line 1: @@
 ====== Avance III 600 MHz - Instal·lació del Topspin 3.6.3 ======
+===== Instal·lació del Topspin 3.6.3 =====
 Instal·lo el TopSpin 3.6.3 a partir del fitxer d'instal·lació descarregat al maig i que es va fer servir per instal·lar el programa a l'antic disc dur.
@@ Line 211: / Line 213: @@
 malauradament per ara no el puc posar en marxa.
-Després de reiniciar els amplificadors, aconsegueixo completar ''cf'' sense errors i el contingut del fitxer ''uxnmr.info'' és semblant al de la instal·lació feta al maig.
+Després de reiniciar els amplificadors, aconsegueixo completar ''cf'' sense errors i el contingut del fitxer ''uxnmr.info'' és semblant al de la instal·lació feta al maig,
+==== Fitxer "uxnmr.info" ====
+<file>
+# cat uxnmr.info
+CONFIGURATION INFORMATION
+=========================
+Path         : /opt/topspin3.6.3/conf/instr/spect/uxnmr.info
+Date         : Fri Aug 13 09:38:41 2021
+Release      : TopSpin 3.6.3
+Installed in : /opt/topspin3.6.3
+Host         : cie-56-18.uab.cat
+OS           : CentOS Linux release 7.9.2009 (Core)
+CPU          : Intel(R) Xeon(R) CPU W3550 @ 3.07GHz (4 cores at 3067 MHz)
+User         : sermnuab
+System       : Avance III 600 NMR spectrometer
+H-frequency : 600.13 MHz
+Description  : Avance III 600 @SeRMN
+Location     : SeRMN UAB
+Bruker Order : PH000806
+Configured in: cie-56-18.uab.cat:/opt/topspin3.6.3/conf/instr/spect
+IPSO: connected to spectrometer subnet
+- TCP/IP address = 149.236.99.90
+ - IPSO type: 19"
+- Tctrl : 1
+- Fctrls: 3
+- Gctrl1: with digital preemphasis
+- Rctrl : none
+- FREDs : none
+- DPP : 1
+DRU1: DEB_DEFAULT
+- TCP/IP address = 149.236.99.77
+- Firmware Version = 170619
+- DRU1 controls AQS-Rack and HPPR/2
+AQS: connected to 149.236.99.77:/dev/tty10
+  _Slot_ SBSB _____________________Board_____________________
+  Number Addr Type HW-VS FW-VS ID  ECL Name   Description
+  -----------------------------------------------------------
+   0x10 0x42   0x3    AW  R  3.0 REC-1  AQS RXAD600 Z102117/00312 ECL 03.00
+   0x34 0xc0   0x1        X  0.4 REF-1  REF-600 Reference Board for AQS Receiver
+   0x24 0x19   0x8    AD  S  2.0 SGU-1  AQS SGU/2 600 Z103081/00300 ECL 02.00 FPGA-Vs=AF
+   0x25 0x19   0x8    AD  S  2.0 SGU-2  AQS SGU/2 600 Z103081/00126 ECL 02.00 FPGA-Vs=AF
+   0x26 0x19   0x8    AD  S  2.0 SGU-3  AQS SGU/2 600 Z103081/00316 ECL 02.00 FPGA-Vs=AF
+   0x21 0xcf     0        P  1.0 PSD-1  PSD/3 Power Supply Distribution Board
+    --   0x20 0xc6     0        B  1.2 AQS/2  AQS/2 chassis
+   0x20  0x7     0        B      MASTER AQS Rack Master
+  Logical Receiver/SGU configuration:
+Router: none installed
+Transmitters at the spectrometer subnet:
+----------------------------------------
+BLA_W1345096_0091 W1345096/0091 ECL 1:
+- TCP/IP address = 149.236.99.93
+- Firmware VS    = 20120627
+- Amplifier      = BLAXH2H300/100/150 E 200-600MHZ: W1345096/0091 ECL 1
+- Router         = BLMMR32 RF AMPLIFIER MODULE: W1345204/0135 ECL 0
+- Controller     = BLA CONTROL BOARD 6 2V H-USB: W1522050/0022 ECL 1
+BLA_W1345092_0060 W1345092/0060 ECL 0:
+- TCP/IP address = 149.236.99.92
+- Firmware VS    = 20120627
+- Amplifier      = BLAX300 E 6-365MHZ: W1345092/0060 ECL 0
+- Router         = BLMMR31 RF AMPLIFIER MODULE: W1345212/0215 ECL 0
+- Controller     = BLA CONTROL BOARD 6 1V V-USB: W1522041/0110 ECL 1
+Gradient amplifiers at the spectrometer subnet:
+----------------------------------------------
+BGA1: BGA_W1213891_0009
+- TCP/IP address   = 149.236.99.94
+- Firmware version = 20080206
+- Web version      = 1.1
+- Current limits   = 0.0/X, 0.0/Y, -10.0/Z (in A)
+BSMS: BSMS/2 connected to ethernet
+- TCP/IP address = 149.236.99.20
+- ELCB firmware version = 20210212
+- SCB channels = 40
+- Shim System = BOSS2-SB
+- 2HTX Amplifier: not available
+- Lock: installed
+- VTU_SPB = BSMS/2 SPB-E SENSOR & PNEUMATIC BD: Z115192/00855 ECL 05.04
+- VTU_VPSB1 = BSMS/2 VARIABLE POWER SUPPLY BD: Z115193/04339 ECL 01.05
+VTU: in BSMS/2 connected to ethernet
+- TCP/IP address = 149.236.99.20
+SampleCase: in BSMS/2 connected to ethernet
+- TCP/IP address = 149.236.99.20
+Bruker Automatic Changer: device connected to 149.236.99.90:/dev/tty01
+- Capacity: 24 holders
+- Firmware: 970111
+- use BACS air  = yes
+- BACS sx delay = 10 s
+- Sample Rail fast changer mode = no
+Eurotherm VTU: device connected to 149.236.99.90:/dev/tty05
+- (used by TopSpin)
+Preamplifiers :
+HPPR2: - HPPR/2 preamplifier connected to 149.236.99.77:/dev/tty10
+    Type      : HPPR/2
+    Controller: Cover/1 with Application firmware = AQ
+LEDs for tuning, 15 LEDs for matching
+    Module  1 : 1H LNA
+                PN=Z003462, SN=00485 from 20061101
+    Module  2 : XBB19F 2HS
+                PN=Z003506, SN=00529 from 20061024
+    Module  3 : 2H
+                PN=Z003473, SN=00491 from 20061206
+Gradient Controller cable connections
+--------------------------------------------------------------------
+GCtrl1: connected via DPP to GREAT 1-10 Gradient Amplifier Unit W1213891/0009
+RF cable connections (detected)
+--------------------------------------------------------------------
+SGU1 NORM output -> input 1 of transmitter 1 (BLAXH2H300/100/150 E 200-600MHZ W1345096/0091 at TCP/IP 149.236.99.93)
+SGU1 AUX  output -> input 4 of transmitter 1 (BLAXH2H300/100/150 E 200-600MHZ W1345096/0091 at TCP/IP 149.236.99.93)
+SGU2 NORM output -> input 2 of transmitter 1 (BLAXH2H300/100/150 E 200-600MHZ W1345096/0091 at TCP/IP 149.236.99.93)
+SGU2 AUX  output -> TUNE signal input of HPPR
+SGU3 NORM output -> input 3 of transmitter 1 (BLAXH2H300/100/150 E 200-600MHZ W1345096/0091 at TCP/IP 149.236.99.93)
+SGU3 AUX  output -> input 1 of transmitter 2 (BLAX300 E 6-365MHZ W1345092/0060 at TCP/IP 149.236.99.92)
+Blanking cable connections (detected)
+--------------------------------------------------------------------
+transmitter 1 = BLAXH2H300/100/150 E 200-600MHZ W1345096/0091 at TCP/IP 149.236.99.93:
+- amplifier 1H-100W uses blanking 2
+- amplifier X-300W uses blanking 1
+- amplifier 2H-150W needs no blanking
+transmitter 2 = BLAX300 E 6-365MHZ W1345092/0060 at TCP/IP 149.236.99.92:
+- amplifier X-300W uses blanking 3
+</file>
+==== Fitxers de configuració de les connexions RS232 ====
+La configuració de les connexions per port sèrie (RS232) també coincideix amb la del mes de maig,
+<file>
+# for FILE in ./rs232_device/*
+> do
+> echo $FILE
+> cat $FILE
+> echo
+> done
+./rs232_device/aqs
+# TOPSPIN alpha TTY configuration file
+# created automatically by 'cf'
+# do not edit, changes are lost after next 'cf'
+unit   = AQS
+host   = 149.236.99.77
+device = /dev/tty10
+type   = RS485
+stty   = 9600 min 1 time 50 cs8 hupcl cread clocal
+./rs232_device/bacs
+# TOPSPIN alpha TTY configuration file
+# created automatically by 'cf'
+# do not edit, changes are lost after next 'cf'
+unit   = Bruker Automatic Changer
+host   = 149.236.99.90
+device = /dev/tty01
+type   = RS232
+stty   = 9600 min 1 time 50 cs8 hupcl cread clocal
+./rs232_device/preamp1
+# TOPSPIN alpha TTY configuration file
+# created automatically by 'cf'
+# do not edit, changes are lost after next 'cf'
+unit   = HPPR/2 preamplifier
+host   = 149.236.99.77
+device = /dev/tty10
+type   = RS485
+stty   = 9600 min 1 time 50 cs8 hupcl cread clocal
+./rs232_device/temp
+# TOPSPIN alpha TTY configuration file
+# created automatically by 'cf'
+# do not edit, changes are lost after next 'cf'
+unit   = Eurotherm VTU
+host   = 149.236.99.90
+device = /dev/tty05
+type   = RS232
+stty   = 9600 time 5 parenb cs7 cread clocal istrip
+</file>

SeRMN Wiki

User Tools

Site Tools

Differences

Page Tools